M1020A-玉环江南机床厂

Grinding machine

——专业铸就卓越品质——

M1020A

详细说明:

＞＞Main specifications and parameters

磨削直径 Grinding dia(mm)	通磨 Thru-feed	0.5-20mm	磨削长度 Grinding length(mm)	通磨 Thru-feed	80mm
	切入磨 Plunge feed	3-20mm		切入磨 Plunge feed	80mm
导轮回转角度 The rotation angle of guide wheel	垂直面内 In vertical plane	-2°~+4°	工作精度 Machining accuracy	圆度 Roundness(μm)	2μm
	水平面内 In horizontal plane	-1°~+3°		圆柱度 Cylindricity(μm)	2.5μm
砂轮与导轮中心连线到托架面高度 Height from centerline of gri.wheel & reg.wheel to workrest(mm)		170mm
砂轮规格 Gri,wheel spec(mm)		PSA300100127	导轮规格 Reg.wheel.spec(mm)		PSA20010075
砂轮转速 Gri,wheel speed(r/min)		2100r/min	导轮转速 The wheel speed		10-180r/min
机床总功率 Total power of machine(kw)		5.35kw	机床重量 Machine weight(kg)		2000kg
机床外形尺寸 Overall dimensions(mm)		175012901350mm	手轮刻度每格进给量 Feed rate of hanwheel perdivision(mm)		0.002㎜

＞＞Characteristic of machine tool

▲The layout of machine tools with side guide wheel frame moves
▲The grinding wheel shaft adopts the suspension and extension structure, the replacement of the grinding wheel is convenient.
▲Multi slice dynamic pressure oil film bearing for grinding wheel shaft
▲The wheel shaft overhang structure, convenient replacement.
▲Guide wheel shaft multi piece dynamic pressure oil film bearing
▲The 1:30 guide wheel shaft bearing cone
▲The wheel speed adopts AC frequency conversion stepless speed regulation
▲Machine tool equipped with cutting mechanism
▲The machine tool is equipped with a long workpiece through the grinding bracket