Grinding machine

——专业铸就卓越品质——

M10100
产品图

详细说明:


＞＞Main specifications and parameters

切入磨削 Plunge feed 磨削直径 Grinding dia(mm) 10~100mm 通磨 Thru-feed 磨削直径 Grinding dia(mm) 10~100mm
******磨削长度 Grinding length(mm) 195mm ******磨削长度 Grinding length(mm) 210mm
磨削轮规格 Gri.wheel.spec(mm) PSA500*200*305mm 导轮******规格 Reg.wheel.spec(mm) PSA350*200*127mm
砂轮转速 Gri.wheel.speed(r/min) 1250r/min 导轮转度 Reg.wheel.speed(r/min) 10~200r/min
导轮回转角度 Reg.wheel swivel angle° 垂直平面内 Vertical plane -2°~+5° 进给手轮每转进给量 Feed rate of handwheel perdivision(mm) 0.4mm
水平平面内 Horizontal plane 0°~+3° 进给手轮每格进给量 Feed rate of handwheel perdivision(mm) 0.002mm
切入磨削行程量 Cut in grinding stroke 总行程量 Head office process 3.5mm

修整器刻度盘每转过一格进给量

Each turn a dresser dial feed(mm)

 0.01mm
快速行程量 Rapid stroke volume 3.5~2.0mm

两砂导轮中心连线至托架底面高

Height from centerline of reg.wheel®.wheel to workrest(mm)

 255mm
慢速行程量 Slow stroke 0~1.5mm

两砂轮中心连线至托架底面距离

Height from centerline of gri.wheel&gri.wheel to workrest(mm)

 1060mm
冷却泵流量 Cooling pump flow 100L/min 机床总功率 Cooling pump flow 21.66kw
磨削轮电动机 Grinding wheel motor(kw) 18.5kw 导轮电动机 Wheel motor(kw) 2.2kw
冷却泵电动机 Cooling pump motor(kw) 0.12kw 润滑泵电动机 Lubricating pump motor(kw) 0.09kw
液压泵电动机 Hydraulic pump motor 0.75kw 工作精度 Working accuracy 圆度 Roundness(μm) 0.002μm
机床引接电源 Machine tool power supply 3N-50HZ 380V 圆柱度 Cylindrical degree(μm) 0.003μm
机床净重 Machine weight(kg) ≈4500kg 粗糙度 Roughness(μm) Ra0.32
机床外形尺寸（长*宽*高） Overall dimensions(mm) 2675*1505*1615mm

＞＞Characteristic of machine tool

The machine is used for cutting and grinding of various parts of the cylinder through the grinding cone, and rotary parts forming. Suitable for mass production and mass production
  • ▲The machine is used for cutting and grinding of various parts of the cylinder through the grinding cone, and rotary parts forming. Suitable for mass production and mass production
  • ▲Wheel spindle bearing for 1:30 integral type sliding bearing, bearing capacity, high precision
  • ▲Wheel frame in horizontal direction for the small angle rotation, in small grinding taper workpiece grinding wheels can be not required the whole into a cone, improve the utilization ratio of grinding wheels and reduce the dressing time
  • ▲The wheel gear adopts AC frequency conversion stepless adjustment.
  • ▲Sand wheel dresser, reciprocating hydraulic transmission, stepless adjustment
  • ▲An automatic cutting grinding device is provided, which can be used for a semi automatic cycle operation.
[返回]
上一条:M1083A
下一条:M11100