Grinding machine

——专业铸就卓越品质——

MM1040A
产品图

详细说明:


>>Main specifications and parameters

磨削直径

Grinding dia(mm)

通磨 Thru-feed 1-40mm

磨削长度

Grinding length(mm)

通磨 Thru-feed 140mm
切入磨 Plunge feed 2-40mm 切入磨 Plunge feed 120mm

导轮回转角度

The rotation angle of guide wheel

垂直面内 In vertical plane -2°~+4°

工作精度

Machining accuracy

圆度 Roundness(μm) 1.0μm
水平面内 In horizontal plane 0°~+3° 圆柱度 Cylindricity(μm) 1.5μm

砂轮与导轮中心连线到托架面高度

Height from centerline of gri.wheel & reg.wheel to workrest(mm)

190mm 粗糙度 Roughness(μm) 0.16μm
砂轮规格 Gri,wheel spec(mm) PSA350*125*127 导轮规格 Reg.wheel.spec(mm) PSA250*125*75
砂轮转速 Gri,wheel speed(r/min) 1870r/min 导轮转速 The wheel speed 20-180r/min
机床总功率 Total power of machine(kw) 10.30kw 导轮电动机功率 Wheel motor 1.1kw
砂轮电动机功率 Grinding wheel motor 7.5kw 机床重量 Machine weight(kg) 2000kg
机床外形尺寸 Overall dimensions(mm) 1550*1300*1400mm

>>Characteristic of machine tool

System: the system of centerless grinder series of special customization system, easy and convenient operation, humanization, can be used for semi-automatic / automatic cycle work programmed according to customer needs can be staged grinding, piecewise function of residence, the automatic state can be grinding production according to the needs of customers, then automatically stop
Feed: feed mechanism with Taiwan TECO servo motor and ball screw feeding, accurate positioning, fast response
  • ▲The layout of machine tools with side guide wheel frame moves
  • ▲The grinding wheel shaft adopts the suspension and extension structure, the replacement of the grinding wheel is convenient.
  • ▲Multi slice dynamic pressure oil film bearing for grinding wheel shaft
  • ▲The wheel shaft overhang structure, convenient replacement.
  • ▲Guide wheel shaft multi piece dynamic pressure oil film bearing
  • ▲The 1:30 guide wheel shaft cone sliding bearing and three point positioning
  • ▲The wheel speed adopts AC frequency conversion stepless speed regulation
  • ▲Machine tool cutting mechanism configuration servo motor feed (single axis control) can be used for manual, semi-automatic, fully automatic cycle work
  • ▲The machine tool is equipped with a long workpiece through the grinding bracket
上一条:MK1080B
下一条:MT1040A