M1050A标准型-玉环江南机床厂

Grinding machine

——专业铸就卓越品质——

M1050A标准型

详细说明:

＞＞Main specifications and parameters

切入磨削 Plunge feed	磨削直径 Grinding dia(mm)	2-50mm	通磨 Thru-feed	磨削直径 Grinding dia(mm)	2-50mm
	******磨削长度 Grinding length(mm)	120mm		******磨削长度（标准托架) Grinding length(mm)	120mm
磨削轮规格 Gri.wheel.spec(mm)		PSA400150203mm	导轮******规格 Reg.wheel.spec(mm)		PSA300150127mm
磨削轮转速 Gri.wheel.speed(r/min)		1668r/min	导轮回转角度 Reg.wheel swivel angle°	垂直平面内 Vertical plane	-2°~+5°
导轮转速 Reg.wheel.speed(r/min)		20-200r/min		水平平面内 Horizontal plane	-1°~+3°
磨削进给量 Grinding feed	进给手轮每转进给量 Feed wheel feed(mm)	0.4mm	切入磨削行程量 Cut in grinding stroke	快速行程量总行程量 Rapid stroke volume(mm)	2-3.5mm
	进给手轮每格进给量 Feed hand wheel feed(mm)	0.002mm		慢速行程量 Slow stroke(mm)	0-1.5mm
修整器刻度盘每转过一格进给量 Each turn a dresser dial feed(mm)		0.01mm	两砂轮中心连线至托架底面高 Height from centerline of gri.wheel®.wheel to workrest(mm)		220mm
两砂轮中心连线至床身底面距离 Height from centerline of gri.wheel®.wheel to machine(mm)		1990mm	机床总功率 Total power of machine(kw)		13.84kw
磨削轮电动机 Grinding wheel motor(kw)		11kw	导轮电动机 Wheel motor(kw)		1.5kw
液压泵电动机 Hydraulic motor(kw)		1.1kw	冷却泵电动机 Cooling pump motor(kw)		0.12kw
润滑泵电动机 Lubricating pump motor(kw)		0.09kw	工作精度 Working accuracy	圆度 Roundness(μm)	2μm
机床引接电源 Machine tool power supply		3N-50HZ 380V		圆柱度 Cylindrical degree(μm)	3μm
机床净重 Machine weight(kg)		≈2800kg		粗糙度 Roughness(μm)	Ra0.32
机床外形尺寸（长宽高） Overall dimensions(mm)		192016811479mm

＞＞Characteristic of machine tool

The machine is used for cutting and grinding of various parts of the cylinder through the grinding cone, and rotary parts forming

▲The grinding wheel spindle bearing is five slice dynamic sliding bearing, which has large bearing capacity and high rigidity.
▲Wheel spindle bearing for 1:30 integral type sliding bearings, large bearing capacity, high precision
▲Wheel frame in horizontal direction for the small angle rotation, in small grinding taper workpiece grinding wheels can be not required the whole into a cone, improve the utilization ratio of grinding wheels and reduce the dressing time
▲The wheel gear adopts AC frequency conversion stepless adjustment.
▲Sand wheel dresser, reciprocating hydraulic transmission, stepless adjustment
▲An automatic cutting grinding device is provided, which can be used for a semi automatic cycle operation.

[返回]

上一条:M1020A
下一条:M1050A通磨型